The TCC-50-MCS provides a cost-effective solution for those who need the benefits of chipless rotary cutting but have lower volume requirements.

The pipe is manually loaded into the adjustable stopper by the operator, then automatic rotating cutting takes place. Cutting length adjustments can be made quickly and accurately with a digital readout. The pipe diameter range is 1.5–50.8 mm (0.06–2″). The machine is suitable for copper, aluminum, brass, CuNi, mild and stainless steel.

Rotary cutting eliminates chips, scrap, secondary deburring and parts washing. It is an environmentally friendly, quiet and fast cutting method. Minimum I.C. contraction is vital for secondary operations such as mandrel bending and independent pipe end forming. With the TCC-50-MCS, this can be achieved using a fast, two-step cutting method.

Çek-ayır yöntemi en gelişmiş kesme metodudur: ilk önce kesme diski boru çeperine yaklaşık %95 oranında girer. Ardından kesilen uzunluk parçayı çekerek ayrılır. Bu işlem bıçağın boru çeperini tamamen kesmesi durumunda oluşabilecek İ.Ç. daralmasını ortadan kaldırır veya en aza indirir.

With this feature, secondary operations are easier to carry out as the cutting quality is generally good enough without deburring and chamfering of the pipe ends. The method also allows easy chaining of different processes such as cutting + pipe end forming/bending.

ADVANTAGES

• No chips, scraps, secondary deburring and parts washing.
• Environmentally friendly, low noise and fast.
• Minimum I.C. contraction.